Languages:

OSO WALLY W

Wall-mounted water heater with all connections below

WALLY – W – has all pipe connections elegantly hidden underneath, and a slim diameter makes it especially suitable for hanging on the wall.WALLY can also be placed on the floor thanks to its unique design. WALLY can be placed close to the ceiling and save floor space with the wall bracket. Capacity can be increased by raising the temperature in the water heater to 75 °C, by using the externally adjustable thermostat. Outgoing temperature will be approx. 10 °C lower than the thermostat setting due to the patented and integrated mixing function.Practical flex hoses for easy installation included. The supplied safety valve must be mounted on the cold water inlet.

WALLY has a stylish design resembling the SAGA series, which hides all pipes and connections. The patented mixing function lowers the outgoing water temperature and reduces the risk of scalding. WALLY features low heat loss with 40 mm. PUR insulation, in combination with class-leading storage temperature for unbeatable performance and more hot water.

WHY CHOOSE WALLY?

  • Save approx. 250 kWh / year vs. glass wool insulated products
  • Save floor space with a slim diameter and all connections below
  • Wall bracket included

Advantages

IMPORTANT EQUIPMENT

Weight 50 kg
Dimensions 1 cm
wally 30 wally 50 wally 80 wally 100
SpecificationsUNITW 30 – 2 kW / 1 × 230 VW 50 – 2 kW / 1 × 230 VW 70 – 2 kW / 1 × 230 VW 90 – 2 kW / 1 × 230 V
Identification
Product no.OSO80620451 80620452 8062045380620454
Product nameW 30 – 2 kW / 1 × 230 VW 50 – 2 kW / 1 × 230 VW 70 – 2 kW / 1 × 230 VW 100 – 2 kW / 1 × 230 V
UsageNot applicableNot applicableNot applicableNot applicable
PlacementWallFloorWallWall
Dimensions
Diameter — ⌀mm434434430430
Height - Hmm542705 9201180
Weightkg11162430
Packagingmm450 × 450 × 580 450 × 450 × 790 450 × 450 × 980450 × 450 × 1250
Freight volumedm3117160198253
Technical/ErP information
Capacitypersons1.0 1.52.02.0
Capacity 40°CL5284108143
VolumeL30456691
Heat-up time ΔT 65°Chours1,0 1,62,33,1
Thermostat set point°C70706565
Heat loss-EN 12897watt22294248
AEC (energy consumption)kW/year5391 384 Not applicableNot applicable
Energy efficiency%3437Not applicableNot applicable
Tapping profile3XS–XXLSMNot applicableNot applicable
Energy ratingA+–FCCCC

Advantages

MORE HOT WATER
Substantially higher temperature (70°C+), highly efficient mixing valve (no scolding), minimal heat loss and optimal design features gives up to 20 % more hot water and class leading capacity.

PRO INSULATION
The use of NANOPUR™ with insulation values far surpassing Pentane, often in combination with VACUUM panels, ensures minimum heat loss and class leading energy efficiency.

STRONGER
EVERLAST™ titanium alloyed stainless steel in combination with OSO’s unique ULTRAWELD™ system and state-of-the-art passivation process equals class leading corrosion resistance.

LIGHTER
EVERLAST™ titanium alloyed, high tensile strength, stainless steel equals lower weight and efficient use of resources. OSO products are more than 40 % lighter than enameled products.

BUILT TO LAST
INCOTEC™ el. immersion heaters with ultra high-grade Incoloy 825 stainless, DZR brass, zinc-free soldering and carefully calculated surface loads results in maximum durability in hard water.