OSO DELTA GEOCOIL DGC

Hot water cylinder custom designed for heat pumps up to 10 kW

DELTA GEOCOIL – DGC – is specially designed for maximum efficient hot water production against all types of heat pumps up to 18kW (200 L = 15kW / 300 L = 18kW), thanks to the large heating surface (2.6 – 3.1 m²) on the heat exchanger. DELTA GEOCOIL comes standard with electric heating element at the bottom of the tank for maximum protection against legionella (must be controlled externally). The element can also be used as a backup for the heat pump when needed, which provides maximum operational reliability. Mixing valve can easily be retrofitted as an option if required.

DELTA is our most energy-efficient boiler series, and minimizes heat loss with increased insulation, the use of vacuum panels and functional design. DELTA has been developed with a number of smart technical solutions especially suitable for alternative energy sources such as heat pumps, solar collectors or bio boilers. DELTA also has unique corrosion protection and can withstand 3 × higher salt content than other boilers.

WHY CHOOSE DELTA GEOCOIL?

  • Save approx. 650 kWh / year in relation to good, insulated water heaters (200 L)
  • Integrated heat exchanger for heat pump ≤ 18kW
  • 3 x higher corrosion resistance than others

ADVANTAGES

IMPORTANT EQUIPMENT

Weight 200 kg
Dimensions 3 cm
Delta Geocoil DGC200 snittegningDelta Geocoil 250 snittegningDelta Geocoil DGC 300 snittegning
SpecificationsUNITDGC 200 - 3 kW / 1 × 230 V + HX 1,4 m²DGC 250 – 3 kW / 1 × 230 V + HX 2,4 m²DGC 300 - 3 kW / 1 × 230 V + HX 1,8 m²
Identification
Product no.OSO8000322 80003238000324
Product nameDGC 200 - 3 kW / 1 × 230 V + HX 1,4 m² DGC 250 – 3 kW / 1 × 230 V + HX 2,4 m²DGC 300 - 3 kW / 1 × 230 V + HX 1,8 m²
UsageNot applicableNot applicable
PlacementFloorFloorFloor
Dimensions
Diameter — ⌀mm595 595595
Height - Hmm127015401750
Weightkg536776
Packagingmm595 × 595 × 1305 595 × 595 × 1765
Freight volumedm3462560625
Technical/ErP information
Capacitypersons4,06,0
Capacity 40°CL191245282
VolumeL 245
Heat-up time ΔT 65°ChoursN/A N/A
Thermostat set point°C7070
Heat loss-EN 12897watt5870
AEC (energy consumption)kW/yearNot applicableNot applicable
Energy efficiency%Not applicableNot applicable
Tapping profile3XS–XXLNot applicableNot applicable
Energy ratingA+–FBC

Advantages

MORE HOT WATER
Substantially higher temperature (70°C+), highly efficient mixing valve (no scolding), minimal heat loss and optimal design features gives up to 20 % more hot water and class leading capacity.

PRO INSULATION
The use of NANOPUR™ with insulation values far surpassing Pentane, often in combination with VACUUM panels, ensures minimum heat loss and class leading energy efficiency.

STRONGER
EVERLAST™ titanium alloyed stainless steel in combination with OSO’s unique ULTRAWELD™ system and state-of-the-art passivation process equals class leading corrosion resistance.

LIGHTER
EVERLAST™ titanium alloyed, high tensile strength, stainless steel equals lower weight and efficient use of resources. OSO products are more than 40 % lighter than enameled products.

BUILT TO LAST
INCOTEC™ el. immersion heaters with ultra high-grade Incoloy 825 stainless, DZR brass, zinc-free soldering and carefully calculated surface loads results in maximum durability in hard water.

Documents