OSO SAGA S
Unbeatable performance and pioneering design
SAGA series can be installed anywhere thanks to its pioneering design features, covering all pipings and connections. SAGA has been developed with high grade material selection and intelligent technical solutions exclusive to OSO. SAGA boasts class-leading insulation capabilities resulting in considerable energy savings, while maintaining a higher temperature than others (75 °C) for unbeatable performance and more hot water in a smaller unit.
SAGA — S is suitable for most hot water requirements and comes standard with ultra-grade INCOTEC immersion heater as well as SOLAR option. OSO SOLAR kit (add-on) connects to a separate ½" connection, in combination with solar collectors. Alternatively, this can be useful as hot water circulation or as direct hot water draw-off connection. SAGA is also available with OSO iQ–CONTROL which lowers tank temperature during period with low consumption, resulting in considerable energy savings. Adjustable hot water draw-off temperature (prevents scalding) to the taps is ensured by the factory fitted UX mixing valve with maximum water flow rate of 0,7 L/s.
WHY CHOOSE SAGA?
• Reduce heat loss by 300 kWh* / year with NANOPUR*
• Higher temperature and optimal design gives up to 20 % more hot water
• 5 year warranty on the stainless steel pressure tank
*Compared to 200 L cylinder with EPS insulation
|Specifications||Unit||S 150 - 3 kW / 1 × 230 V||S 200 - 3 kW / 1 × 230 V||S 250 - 3 kW / 1 × 230 V||S 300 - 3 kW / 1 × 230 V|
|Product name||S 150 - 3 kW / 1 × 230 V||S 200 - 3 kW / 1 × 230 V||S 250 - 3 kW / 1 × 230 V||S 300 - 3 kW / 1 × 230 V|
|Usage||Not applicable||Not applicable||Not applicable||Not applicable|
|Diameter — ⌀||mm||580||580||580||580|
|Height — H||mm||950||1260||1470||1710|
|Packaging||mm||595 × 595 × 1055||595 × 595 × 1305||595 × 595 × 1555||595 × 595 × 1755|
|Technical / ErP information|
|Thermostat set point||°C||70||70||70||70|
|Heat loss |
|Heat loss / 24 hrs - EN 12897||kWh/day||Not applicable||Not applicable||Not applicable||Not applicable|
|AEC (energy consumption)||kW /year||Not applicable||Not applicable||Not applicable||Not applicable|
|Energy efficiency||%||Not applicable||Not applicable||Not applicable||Not applicable|
|Tapping profile||3XS–XXL||Not applicable||Not applicable||Not applicable||Not applicable|
|Primary Heating Power||kW||Not applicable||Not applicable||Not applicable||Not applicable|
|Heat-up time ΔT 55°C Coil||Mins||Not applicable||Not applicable||Not applicable||Not applicable|
|Heat-up time ΔT 55°C upper element||Mins||Not applicable||Not applicable||Not applicable||Not applicable|
|Heat-up time ΔT 55°C lower element||Mins||Not applicable||Not applicable||Not applicable||Not applicable|
|Recovery time ΔT 55°C coil 70%||Mins||Not applicable||Not applicable||Not applicable||Not applicable|
|Recovery time ΔT 55°C upper element 70%||Mins||Not applicable||Not applicable||Not applicable||Not applicable|
|Recovery time ΔT 55°C lower element 70%||Mins||Not applicable||Not applicable||Not applicable||Not applicable|
MORE HOT WATER
Substantially higher temperature (70°C+), highly efficient mixing valve (no scolding), minimal heat loss and optimal design features gives up to 20 % more hot water and class leading capacity.
The use of NANOPUR™ with insulation values far surpassing Pentane, often in combination with VACUUM panels, ensures minimum heat loss and class leading energy efficiency.
EVERLAST™ titanium alloyed stainless steel in combination with OSO’s unique ULTRAWELD™ system and state-of-the-art passivation process equals class leading corrosion resistance.
EVERLAST™ titanium alloyed, high tensile strength, stainless steel equals lower weight and efficient use of resources. OSO products are more than 40 % lighter than enameled products.
BUILT TO LAST
INCOTEC™ el. immersion heaters with ultra high-grade Incoloy 825 stainless, DZR brass, zinc-free soldering and carefully calculated surface loads results in maximum durability in hard water.