Languages:

MAXI COIL – MC

Water heater with unbeatable performance
and energy flexibility

MAXI COIL — MC is ideal for electric operation in summer / boiler operation in winter, and is
a good alternative to the TURBO system for smaller hot water needs. MAXI COIL has an
integrated tube heat exchanger of 1.0m², and a capacity of up to 30kW from external high
temperature energy source. The electric immersion heaters comes with optional power
2.5–15 kW, 230–400 V + N 3-phase, and is thermostat controlled 50–75 °C in three steps
with separate safety thermostats. Contactors are not required and the support cable is connected directly to the electric central. Installation kits for cold water inlet with shut-off valve,hot water outlet with mixing valve, plate heat exchanger with pumps (TURBOSYSTEM) and piping for connecting multiple units has been custom-made to fit directly on the MAXI series.

The commercial cylinders in the MAXI series have shown class-leading operational durability for commercial hot water systems through the last 50 years.

WHY CHOOSE MAXI COIL?
• Energy flexibility for summer / winter operation, or as back-up
• Extreme operational durability with el. heaters w/o contactors
• 10 bar design pressure and class-leading corrosion resistance

Advantages

Components

MAXI MC400 SECTION VIEW SIDE e1612172823473 MAXI MC600 SECTION VIEW SIDE e1612172947647 MAXI MC1000 SECTION VIEW SIDE 1 e1612172896380
SpecificationsUNITMC 400 - 15 kW / 3 × 230 V + HX 1,0 m²MC 600 - 15 kW / 3 × 230 V + HX 1,0 m²MC 1000 - 15 kW / 3 × 230 V + HX 1,0 m²
Identification
Product no.OSO8001752 8001773 8001754
Product nameMC 400 - 15 kW / 3 × 230 V + HX 1,0 m² MC 600 - 15 kW / 3 × 230 V + HX 1,0 m²MC 1000 - 15 kW / 3 × 230 V + HX 1,0 m²
UsageNot applicableNot applicableNot applicable
PlacementFloorFloorFloor
Dimensions
Diameter — ⌀mm5958001000
Height - Hmm217520302120
Weightkg85114189
Packagingmm595 × 595 × 2240 800 × 800 × 2000 1020 × 1020 × 2200
Freight volumedm378712802289
Technical/ErP information
CapacitypersonsNot ApplicableNot ApplicableNot Applicable
Capacity 40°CLNot applicable Not applicable Not applicable
VolumeL363568877
Heat-up time ΔT 65°ChoursN/A N/A N/A
Thermostat set point°C7575 75
Heat loss-EN 12897watt94119142
AEC (energy consumption)kW/yearNot applicableNot applicableNot applicable
Energy efficiency%Not applicableNot applicableNot applicable
Tapping profile3XS–XXLNot applicableNot applicableNot applicable
Energy ratingA+–FCCC

Advantages

MORE HOT WATER
Substantially higher temperature (70°C+), highly efficient mixing valve (no scolding), minimal heat loss and optimal design features gives up to 20 % more hot water and class leading capacity.

PRO INSULATION
The use of NANOPUR™ with insulation values far surpassing Pentane, often in combination with VACUUM panels, ensures minimum heat loss and class leading energy efficiency.

STRONGER
EVERLAST™ titanium alloyed stainless steel in combination with OSO’s unique ULTRAWELD™ system and state-of-the-art passivation process equals class leading corrosion resistance.

LIGHTER
EVERLAST™ titanium alloyed, high tensile strength, stainless steel equals lower weight and efficient use of resources. OSO products are more than 40 % lighter than enameled products.

BUILT TO LAST
INCOTEC™ el. immersion heaters with ultra high-grade Incoloy 825 stainless, DZR brass, zinc-free soldering and carefully calculated surface loads results in maximum durability in hard water.