MAXI STANDARD - MS

Commercial hot water cylinder with unbeatable performance and lifetime economy

The comercial hot water cylinders from the MAXI series has shown class-leading operational durability for commercial hot water systems through the last 50 years. MAXI has been constructed with EVERLAST™ high-alloy stainless steel in combination with ULTRAWELD™ technology for optimal corrosion resistance. MAXI series can be modified according to customer requirements.

The comercial hot water cylinder MAXI STANDARD — MS is suitable for most commercial hot water demands, and is heated either with the integrated electric INCOTEC immersion heaters, or via an external energy source and the TURBOSYSTEM with plate heat exchanger (optional capacity) and double sets of pumps for extra operational safety. The electric immersion heaters has optional effect 5–15 kW, 230–400 V + N 3-phase, and is thermostat controlled 60–90 °C in three steps with separate safety thermostats. Contactors are not required and the support cable is connected directly to the central.Installation kits for cold water inlet with shut-off valve, hot water outlet with mixing valve, plate heat exchanger with pumps (TURBOSYSTEM) and piping for connecting multiple units has been custom-made to fit directly on the MAXI series, with double sealing for an added layer of safety.

WHY CHOOSE MAXI STANDARD?
• Extreme operational durability with el. heaters w/o contactors
• Flexible choice of energy source with TURBOSYSTEM (add-on)
• 10 bar design pressure and class-leading corrosion resistance

Advantages

Components

MAXI MS1000 SECTION VIEW SIDE e1612172427344ms300MAXI MS400 SECTION VIEW SIDE e1612172319419MAXI MS600 SECTION VIEW SIDE e1612172391455
SpecificationsUNITMS 1000 - 15 kW / 3 × 230 VMS 300 – 15 kW / 3 x 230 VMS 400 - 15 kW / 3 × 230 VMS 600 - 15 kW / 3 × 230 V
Identification
Product no.OSO800155480015518001552 8001553
Product nameMS 1000 - 15 kW / 3 × 230 VMS 300 – 15 kW / 3 x 230 VMS 400 – 15 kW / 3 x 230 VMS 600 – 15 kW / 3 x 230 V
UsageNot applicableNot applicableNot applicableNot applicable
PlacementFloorFloorFloorFloor
Dimensions
Diameter — ⌀mm1000595580780
Height - Hmm2100168520851900
Weightkg1335779133
Packagingmm1020 × 1020 × 2200595 × 595 × 2240 800 × 800 × 2000
Freight volumedm31280 0,62 m³7871280
Technical/ErP information
CapacitypersonsNot Applicable280Not ApplicableNot Applicable
Capacity 40°CLNot applicable Not applicableNot applicable
VolumeL885280372550
Heat-up time ΔT 65°ChoursN/AN/AN/A
Thermostat set point°C75 75 °C7575
Heat loss-EN 12897watt17590155
AEC (energy consumption)kW/yearNot applicableNot applicableNot applicable
Energy efficiency%Not applicableNot applicableNot applicable
Tapping profile3XS–XXLNot applicableNot applicableNot applicable
Energy ratingA+–FCCCC

Advantages

MORE HOT WATER
Substantially higher temperature (70°C+), highly efficient mixing valve (no scolding), minimal heat loss and optimal design features gives up to 20 % more hot water and class leading capacity.

PRO INSULATION
The use of NANOPUR™ with insulation values far surpassing Pentane, often in combination with VACUUM panels, ensures minimum heat loss and class leading energy efficiency.

STRONGER
EVERLAST™ titanium alloyed stainless steel in combination with OSO’s unique ULTRAWELD™ system and state-of-the-art passivation process equals class leading corrosion resistance.

LIGHTER
EVERLAST™ titanium alloyed, high tensile strength, stainless steel equals lower weight and efficient use of resources. OSO products are more than 40 % lighter than enameled products.

BUILT TO LAST
INCOTEC™ el. immersion heaters with ultra high-grade Incoloy 825 stainless, DZR brass, zinc-free soldering and carefully calculated surface loads results in maximum durability in hard water.

Documents