DELTA INOX

TILBAKE TIL ALLE PRODUKTER

OSO DELTA INOX
DI

All stainless steel for tough environments

DELTA series is elegant and functional in its design, delivering class-leading insulation characteristics and ErP* A-rating with heat loss reduced by > 60 % compared to EPS insulation. DELTA has been developed with high grade material selection and intelligent technical solutions exclusive to OSO, and everything we’ve learned over the past 50 years of manufacturing stainless steel water heaters is embodied in the DELTA series. * Energy-related Products Directive – 2009 / 125 / EC. 

DELTA INOX — DI has a stainless steel outer casing for tough environments in agriculture or similar applications. The stainless steel design also makes the DELTA INOX fit seamlessly in modern environments. DELTA INOX comes standard with ultra-grade INCOTEC immersion heater providing a higher temperature than others (75 °C) for unbeatable performance and more hot water in a smaller unit. OSO SOLAR kit (add-on) can be connected to a separate ½" connection, in combination with solar collectors. Alternatively, this can be useful as hot water circulation or as direct hot water draw-off connection for higher temperature demands. Adjustable hot water draw-off temperature (prevents scalding) to the taps is ensured by the factory fitted UX mixing valve with maximum water flow rate of 0,7 L/s.

WHY CHOOSE DELTA INOX?
•  Reduce heat loss by 350 kWh* / year with NANOPUR*
• Higher temperature and optimal design gives up to 20 % more hot water
• 5 year warranty on the stainless steel pressure tank
* Compared to 200 L cylinder with EPS insulation

Unike fordeler
DELTA DESIGN - Elegant and functional
NANOPUR - Class-leading insulation
ULTRAWELD - Superior corrosion resistance
INCOTEC - High durability in hard water
ALL STAINLESS - Solar / hot water connection
MAXTEMP - Hettvanns- / sirkulasjonsstuss
Viktige komponenter
Mixing valve — Adjustable 45–80 °C — Preset 55 °C — ⌀ 15 mm *
Thermostat — Adjustable 60–90 °C — Preset 75 °C
Safety valve — 9 bar — ¾" to drain
El. power cable —Including plug (earth)  — 3 m
Appliance feet — Adjustable — Factory mounted
SpesifikasjonerEnhetDI 200 - 3 kW / 1 × 230 VDI 300 - 3 kW / 1 × 230 V
Sammenlign
Mål
ProduktnummerOSO80004028000404
ProduktserieDELTA INOXDELTA INOX
ProduktnavnDI 200 - 3 kW / 1 × 230 VDI 300 - 3 kW / 1 × 230 V
BehovNot applicable Not applicable
PlasseringGulvGulv
Mål
Diameter — ⌀mm580580
Høyde — Hmm12601710
Vektkg3951
Emballasjemm595 × 595 × 1305595 × 595 × 1765
Fraktvolumdm3462621
Teknisk / ErP data
KapasitetPersoner3.55.5
Kapasitet 40°C vannLNot applicable Not applicable
VolumL199289
Oppvarmingstid
ΔT 65 °C
Timer5,07,3
Termostatsettpunkt°C7575
Varmetap
EN 12897
Watt4864
Heat loss / 24 hrs - EN 12897kWh/dayNot applicable Not applicable
Årlig energiforbrukkW / årNot applicable Not applicable
Energieffektivitet%Not applicable Not applicable
Tappeprofil3XS–XXLNot applicable Not applicable
EnergiklasseA+–FDD
Primary Heating PowerkWNot applicable Not applicable
Heat-up time ΔT 55°C CoilMinsNot applicable Not applicable
Heat-up time ΔT 55°C upper elementMinsNot applicable Not applicable
Heat-up time ΔT 55°C lower elementMinsNot applicable Not applicable
Recovery time ΔT 55°C coil 70%MinsNot applicable Not applicable
Recovery time ΔT 55°C upper element 70%MinsNot applicable Not applicable
Recovery time ΔT 55°C lower element 70%MinsNot applicable Not applicable
Pris
Bruttopris
eks. 25% mva
NOK750880
Bruttopris
inkl. 25% mva
NOKNot applicable Not applicable
Fordeler: 

MORE HOT WATER
Substantially higher temperature (70°C+), highly efficient mixing valve (no scolding), minimal heat loss and optimal design features gives up to 20 % more hot water and class leading capacity.

PRO INSULATION
The use of NANOPUR™ with insulation values far surpassing Pentane, often in combination with VACUUM panels, ensures minimum heat loss and class leading energy efficiency.

STRONGER
EVERLAST™ titanium alloyed stainless steel in combination with OSO’s unique ULTRAWELD™ system and state-of-the-art passivation process equals class leading corrosion resistance.

LIGHTER
EVERLAST™ titanium alloyed, high tensile strength, stainless steel equals lower weight and efficient use of resources. OSO products are more than 40 % lighter than enameled products.

BUILT TO LAST
INCOTEC™ el. immersion heaters with ultra high-grade Incoloy 825 stainless, DZR brass, zinc-free soldering and carefully calculated surface loads results in maximum durability in hard water.