OSO VERSA V
VERSA
Slim diameter and versatile installation on floor or wall
VERSA — V will fit into compact spaces due to its 430 mm. diameter, and can be mounted floorstanding or fixed to wall (wall bracket included / adjustable feet not included).
VERSA can also be fitted under the kitchen sink. VERSA's slim design ensures optimal stratification of hot- and cold water, and the units boasts high performance. To comply with the ErP directive, the thermostat is factory set at 65 °C for 70 / 90 / 120 L (70 °C for 30 / 50 L), but an increase in capacity is easily done by adjusting the thermostat to 75 °C (NB: follow instruction manual when adjusting.) Adjustable hot water draw-off temperature (prevents scalding) to the taps is ensured by UX mixing valve with maximum water flow rate of 0,7 L/s.
WHY CHOOSE VERSA?
• Reduce heat loss by 150 kWh* / year with NANOPUR*
• Slim diameter and versatile installation on floor or wall
• 5 year warranty on the stainless steel pressure tank
* Compared to 100 L cylinder with EPS insulation
 |  |  |  |  | ||
|---|---|---|---|---|---|---|
| Specifications | Unit | V 30 - 2 kW / 1 × 230 V | V 50 - 2 kW / 1 × 230 V | V 70 - 2 kW / 1 × 230 V | V 90 - 2 kW / 1 × 230 V | V 120 - 2 kW / 1 × 230 V |
| Compare | ||||||
| Identification | ||||||
| Product no. | OSO | 8000351 | 8000352 | 8000353 | 8000354 | 8000355 |
| Product series | VERSA | VERSA | VERSA | VERSA | VERSA | |
| Product name | V 30 - 2 kW / 1 × 230 V | V 50 - 2 kW / 1 × 230 V | V 70 - 2 kW / 1 × 230 V | V 90 - 2 kW / 1 × 230 V | V 120 - 2 kW / 1 × 230 V | |
| Usage | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable | |
| Placement | Floor or wall | Floor or wall | Floor or wall | Floor or wall | Floor or wall | |
| Dimensions | ||||||
| Diameter — ⌀ | mm | 430 | 430 | 430 | 430 | 430 |
| Height — H | mm | 500 | 710 | 920 | 1180 | 1500 |
| Weight | kg | 16 | 20 | 24 | 30 | 38 |
| Packaging | mm | 450 × 450 × 580 | 450 × 450 × 790 | 450 × 450 × 980 | 450 × 450 × 1250 | 450 × 450 × 1560 |
| Freight volume | dm3 | 117 | 160 | 198 | 253 | 316 |
| Technical / ErP information | ||||||
| Capacity | Persons | 1.0 | 1.5 | 2.0 | 2.0 | 2.5 |
| Capacity 40°C | L | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable |
| Volume | L | 28 | 48 | 66 | 91 | 121 |
| Heat-up time ΔT 65°C | Hours | 1,0 | 1,6 | 2,3 | 3,1 | 4,0 |
| Thermostat set point | °C | 70 | 70 | 65 | 65 | 65 |
| Heat loss EN 12897 | Watt | 26 | 36 | 43 | 51 | 54 |
| AEC (energy consumption) | kW /year | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable |
| Energy efficiency | % | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable |
| Tapping profile | 3XS–XXL | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable |
| Energy rating | A+–F | C | C | C | C | C |
MORE HOT WATER
Substantially higher temperature (70°C+), highly efficient mixing valve (no scolding), minimal heat loss and optimal design features gives up to 20 % more hot water and class leading capacity.
PRO INSULATION
The use of NANOPUR™ with insulation values far surpassing Pentane, often in combination with VACUUM panels, ensures minimum heat loss and class leading energy efficiency.
STRONGER
EVERLAST™ titanium alloyed stainless steel in combination with OSO’s unique ULTRAWELD™ system and state-of-the-art passivation process equals class leading corrosion resistance.
LIGHTER
EVERLAST™ titanium alloyed, high tensile strength, stainless steel equals lower weight and efficient use of resources. OSO products are more than 40 % lighter than enameled products.
BUILT TO LAST
INCOTEC™ el. immersion heaters with ultra high-grade Incoloy 825 stainless, DZR brass, zinc-free soldering and carefully calculated surface loads results in maximum durability in hard water.
