SAGA XPRESS

GO BACK TO ALL PRODUCTS

OSO SAGA XPRESS
SX

Hot water 3 x faster than standard hot water tanks

SAGA series can be installed anywhere thanks to its pioneering design features, covering all pipings and connections. SAGA has been developed with high grade material selection and intelligent technical solutions exclusive to OSO. SAGA boasts class-leading insulation capabilities resulting in considerable energy savings, while maintaining a higher temperature than others (75 °C) for unbeatable performance and more hot water in a smaller unit. 

SAGA XPRESS — SX is suitable for households with considerable hot water demands and limited space for installation. SAGA XPRESS makes hot water available 3 × faster than standard hot water tanks, without increased energy consumption thanks to flip-flop function between the immersion heaters. SAGA XPRESS increases performance, saves installation space and comes standard with ultra-grade INCOTEC immersion heaters as well as SOLAR option. OSO SOLAR kit (add-on) connects to a separate ½" connection, in combination with solar collectors. Alternatively, this can be useful as hot water circulation or as direct hot water draw-off connection. Adjustable hot water draw-off temperature (prevents scalding) to the taps is ensured by the factory fitted UX mixing valve with maximum water flow rate of 0,7 L/s.

WHY CHOOSE SAGA XPRESS?
• Reduce heat loss by 300 kWh* / year with NANOPUR*
• Hot water 3 x faster than standard hot water tanks
• Higher temperature and optimal design gives up to 20 % more hot water
• 5 year warranty on the stainless steel pressure tank
*Compared to 200 L cylinder with EPS insulation

Advantages
SAGA DESIGN - All connections hidden
NANOPUR - Class-leading insulation
ULTRAWELD - Superior corrosion resistance
INCOTEC - High durability in hard water
XPRESS - Twin heaters with flip-flop
SOLAR–READY - Separate solar connection
Components
Mixing valve—Adjustable 45–80 °C — Preset 55 °C — ⌀ 15 mm *
Thermostat — Adjustable 60–90 °C — Preset 75 °C
Safety valve—9 bar — ¾" to drain
El. power cable —Including plug (earth)  — 3 m
Appliance feet —Adjustable — Factory mounted
SpecificationsUnitSX 150 - 2+(2) kW / 1 × 230 VSX 200 - 3+(3) kW / 1 × 230 VSX 300 - 3+(3) kW / 1 × 230 V
Compare
Identification
Product no.OSO800065280006548000656
Product seriesSAGA XPRESSSAGA XPRESSSAGA XPRESS
Product nameSX 150 - 2+(2) kW / 1 × 230 VSX 200 - 3+(3) kW / 1 × 230 VSX 300 - 3+(3) kW / 1 × 230 V
UsageNot applicable Not applicable Not applicable
PlacementFloorFloorFloor
Dimensions
Diameter — ⌀mm580580580
Height — Hmm95012601710
Weightkg313951
Packagingmm595 × 595 × 1055595 × 595 × 1305595 × 595 × 1755
Freight volumedm3373462621
Technical / ErP information
Capacity Persons3.54.56.5
Capacity    40°CLNot applicable Not applicable Not applicable
VolumeL143194287
Heat-up time 
 ΔT 65°C
Hours5,44,97,2
Thermostat set point°C757575
Heat loss 
 EN 12897
Watt536585
AEC (energy consumption)kW /yearNot applicable Not applicable Not applicable
Energy efficiency%Not applicable Not applicable Not applicable
Tapping profile3XS–XXLNot applicable Not applicable Not applicable
Energy ratingA+–FBCC
Advantages: 

MORE HOT WATER
Substantially higher temperature (70°C+), highly efficient mixing valve (no scolding), minimal heat loss and optimal design features gives up to 20 % more hot water and class leading capacity.

PRO INSULATION
The use of NANOPUR™ with insulation values far surpassing Pentane, often in combination with VACUUM panels, ensures minimum heat loss and class leading energy efficiency.

STRONGER
EVERLAST™ titanium alloyed stainless steel in combination with OSO’s unique ULTRAWELD™ system and state-of-the-art passivation process equals class leading corrosion resistance.

LIGHTER
EVERLAST™ titanium alloyed, high tensile strength, stainless steel equals lower weight and efficient use of resources. OSO products are more than 40 % lighter than enameled products.

BUILT TO LAST
INCOTEC™ el. immersion heaters with ultra high-grade Incoloy 825 stainless, DZR brass, zinc-free soldering and carefully calculated surface loads results in maximum durability in hard water.