DELTA GEOCOIL

GO BACK TO ALL PRODUCTS

OSO DELTA GEOCOIL
DGC

Custom designed for heat pumps up to 10 kW

DELTA series is elegant and functional in its design, delivering class-leading insulation characteristics and ErP* A-rating with heat loss reduced by > 60 % compared to EPS insulation. DELTA has been developed with high grade material selection and intelligent technical solutions exclusive to OSO, and everything we’ve learned over the past 50 years of manufacturing stainless steel water heaters is embodied in the DELTA series. * Energy-related Products Directive – 2009 / 125 / EC. 

DELTA GEOCOIL— DGC 200 / 300 is ideal for maximum domestic hot water production from heat pumps up to 10 / 14 kW, with the large surface area, smooth piped, scale-resistant heating coil. DELTA GEOCOIL has as an ultra-grade INCOTEC immersion heater as booster (or back-up) above the heating coil, raising the DHW temperature to increase capacity and prevent bacterial growth. The booster heater also provides maximum safety if there are any operational problems with the energy source. Sensor pockets for controlling the unit as well as thermometer comes standard. UX mixing valve can be installed for adjustable hot water draw-off temperature (prevents scalding) to the taps.

WHY CHOOSE DELTA GEOCOIL?
•  Reduce heat loss by 400 kWh* / year with NANOPUR and VIP*
• Custom-designed for heat pumps with DHW priority / three way valve up to 15 kW
• 5 year warranty on the stainless steel pressure tank
* Compared to 200 L cylinder with EPS insulation

Advantages
DELTA DESIGN - Elegant and functional
NANOPUR - Class-leading insulation
VACUUM - Ultimate performance
ULTRAWELD - Superior corrosion resistance
INCOTEC - High durability in hard water
ECO–HOTWATER - DHW from alternative energy
Components
Thermostat — Adjustable 20–70 °C — Preset  70 °C
Appliance feet —Adjustable — Factory mounted
Coil connection —2 × ¾" female BSP threads
SpecificationsUnitDGC 200 - 3 kW / 1 × 230 V + HX 1,4 m²DGC 300 - 3 kW / 1 × 230 V + HX 1,8 m²
Compare
Identification
Product no.OSO80003028000304
Product seriesDELTA GEOCOILDELTA GEOCOIL
Product nameDGC 200 - 3 kW / 1 × 230 V + HX 1,4 m²DGC 300 - 3 kW / 1 × 230 V + HX 1,8 m²
UsageNot applicable Not applicable
PlacementFloorFloor
Dimensions
Diameter — ⌀mm595595
Height — Hmm12701750
Weightkg5363
Packagingmm595 × 595 × 1305595 × 595 × 1765
Freight volumedm3462625
Technical / ErP information
Capacity Persons3.05.0
Capacity    40°CLNot applicable Not applicable
VolumeL191282
Heat-up time 
 ΔT 65°C
HoursN/AN/A
Thermostat set point°C7070
Heat loss 
 EN 12897
Watt4349
AEC (energy consumption)kW /yearNot applicable Not applicable
Energy efficiency%Not applicable Not applicable
Tapping profile3XS–XXLNot applicable Not applicable
Energy ratingA+–FAA
Advantages: 

MORE HOT WATER
Substantially higher temperature (70°C+), highly efficient mixing valve (no scolding), minimal heat loss and optimal design features gives up to 20 % more hot water and class leading capacity.

PRO INSULATION
The use of NANOPUR™ with insulation values far surpassing Pentane, often in combination with VACUUM panels, ensures minimum heat loss and class leading energy efficiency.

STRONGER
EVERLAST™ titanium alloyed stainless steel in combination with OSO’s unique ULTRAWELD™ system and state-of-the-art passivation process equals class leading corrosion resistance.

LIGHTER
EVERLAST™ titanium alloyed, high tensile strength, stainless steel equals lower weight and efficient use of resources. OSO products are more than 40 % lighter than enameled products.

BUILT TO LAST
INCOTEC™ el. immersion heaters with ultra high-grade Incoloy 825 stainless, DZR brass, zinc-free soldering and carefully calculated surface loads results in maximum durability in hard water.