Accumulator in stainless steel for hot or cold water
MAXI series has shown class-leading operational durability for commercial hot water systems through the last 50 years. MAXI has been constructed with EVERLAST™ high-alloy stainless steel in combination with ULTRAWELD™ technology for optimal corrosion resistance. MAXI series can be modified according to customer requirements and is available from 400-10 000 litres as standard, up to 15 000 l. on request.
MAXI ACCU HEAT is an ideal accumulator tank for heat pump / solar collectors, ensuring optimal working conditions for the energy source and providing stable temperature to the system.
MAXI ACCU COOL is suitable as accumulator for cooling systems with GLAVAFLEX 19 mm cell rubber insulation. The insulation and the steel outer casing is diffusion proof to prevent condensation against the cold internal tank surface. MAXI ACCU COOL is suitable for room climate systems with refrigerating machines where the unit is the required buffer against the system.
WHY CHOOSE MAXI ACCU?
• Accumulator for hot / cold water provides stable temperature for system
• 6 bar design pressure and class-leading corrosion resistance
|Specifications||Unit||MA 400 - SS / PLUS||MA 600 - SS / PLUS||MA 1000 — SS / PLUS|
|Product series||MAXI ACCU||MAXI ACCU||MAXI ACCU|
|Product name||MA 400 - SS / PLUS||MA 600 - SS / PLUS||MA 1000 — SS / PLUS|
|Usage||Not applicable||Not applicable||Heat|
|Diameter — ⌀||mm||580||780||1000|
|Height — H||mm||2085||1900||2100|
|Packaging||mm||595 × 595 × 2240||800 × 800 × 2000||1020 × 1020 × 2200|
|Technical / ErP information|
|Capacity||Persons||Not applicable||Not applicable||0.0|
|Capacity 40°C||L||Not applicable||Not applicable||Not applicable|
|Heat-up time |
|Thermostat set point||°C||Not applicable||Not applicable||Not applicable|
|Heat loss |
|AEC (energy consumption)||kW /year||Not applicable||Not applicable||Not applicable|
|Energy efficiency||%||Not applicable||Not applicable||Not applicable|
|Tapping profile||3XS–XXL||Not applicable||Not applicable||Not applicable|
MORE HOT WATER
Substantially higher temperature (70°C+), highly efficient mixing valve (no scolding), minimal heat loss and optimal design features gives up to 20 % more hot water and class leading capacity.
The use of NANOPUR™ with insulation values far surpassing Pentane, often in combination with VACUUM panels, ensures minimum heat loss and class leading energy efficiency.
EVERLAST™ titanium alloyed stainless steel in combination with OSO’s unique ULTRAWELD™ system and state-of-the-art passivation process equals class leading corrosion resistance.
EVERLAST™ titanium alloyed, high tensile strength, stainless steel equals lower weight and efficient use of resources. OSO products are more than 40 % lighter than enameled products.
BUILT TO LAST
INCOTEC™ el. immersion heaters with ultra high-grade Incoloy 825 stainless, DZR brass, zinc-free soldering and carefully calculated surface loads results in maximum durability in hard water.