Print this page as PDF

Send this page via e-mail

Add it to Favorites

Share OSO Hotwater on Twitter

Share OSO Hotwater on Facebook

Share this page with others

OSO Super Coil - SC

  - Unique pioneering design with all connection on top / hidden.

The Super Coil is the ideal cylinder in combination with boilers, and has distinctive design features. Ease of installation combined with all connections hidden makes the Super Coil fit seamlessly in every environment. Based on OSO’s experience through 80 years and with more than 3 million units sold, the Super series is the new benchmark.

The Super Coil is the ideal choice in combination with boilers or other high temperature energy sources. The insulated, easily removable top lid hides all connections to the cylinder. The factory fitted mixing valve provides adjustable hot water temperature, non-return and stop valve. Separate T&P valve (Temperature & Pressure relief) is factory fitted. Duplex stainless steel makes the Super series extremely lightweight and space-efficient for easy handling and installation. Low heat loss is provided by OSO ECO Foam, with impressive key figures for GWP of 1 (Global Warming Potential) and ODP of 1 (Ozone Depletion Potential.) Integrated, adjustable feet, as well as channels for drainpipe and electric connection. Installation time is drastically reduced due to factory fitted components.

 

Key advantages:

  • The ultimate DHW cylinder for boilers up to 25kW
  • Pioneering design features with all connections hidden and insulated
  • Duplex stainless steel for lightweight handling and aggressive environments
  • 10 year warranty on the stainless steel inner cylinder & OSO ECO Foam insulation
Delta Geocoil - DGC
Technical Specifications
Quick Facts
Choose volume

Super Coil is available in 3 volumes, suitable for the no. of people designated in the table below. The table is based on experience from average hot water usage in a normal household. If the household has a large hotwater usage, for instance due to large bathtubs, steamshowers etc., one should choose higher volume than designated in the table. Hotwater capacity is calculated by instant tapping at 40°C. At 40°C a normal shower uses approx. 60 l., bathtubs 180 l. and bubblebaths 400 l.

 

 

 
Prod. nr. Product description Capacity Hot water - 40°C Hot Water / hour - 40°C Heat-up Time - 15 - 75°C: Heat loss - 24 hours Dia x H mm. Weight
8,000,801 Super Coil SC 150 - 3 kW/1x230V + coil 0,8m² 3,5 pers. 270 l. Heat Source Heat Source 1,44 kWh ø580x1010 34
8,000,802 Super Coil SC 200 - 3 kW/1x230V + coil 0,8m² 4,5 pers. 360 l. Heat Source Heat Source 1,90 kWh ø580x1260 42
8,000,803 Super Coil SC 300 - 3 kW/1x230V + coil 0,8m² 6,0 pers. 525 l. Heat Source Heat Source 2,30 kWh ø580x1710 54
Product Data Sheet
  - click to expand   - click to collapse
 
Indirect Unit Type Type Type
Product Super Coil SC 150 SC 200 SC 300
Product No. OSO no. 8,000,801 8,000,802 8,000,803
Product Capacity Persons 3,5 4,5 6,0
Product Segment   Domestic Domestic Domestic
Product
Weight - Net kg 34 42 54
Height - Max mm. 1010 1260 1710
Diameter mm. 580 580 580
Volume - Actual ltr. 146 193 284
Usable hot water draw off at 40°C (ltr) ltr. 270 360 525
Hot Water / hour at 40°C (ltr) ltr. Heat Source Heat Source Heat Source
Heat Up Time - 15°C - max Temp. hours Heat Source Heat Source Heat Source
Standing Heat Loss - 24 hours kWh/24 hours 1.44 1.90 2.30
Dimensions - Cardboard Box LxWxH mm. 595x595x1055 595x595x1305 595x595x1755
Volume - Cardboard Box 0.37 0.46 0.62
Materials
Inner Cylinder Stainless Steel Duplex Duplex Duplex
Coil(s) Stainless Steel Duplex Duplex Duplex
Electric Element(s) Stainless Steel Incoloy 825 Incoloy 825 Incoloy 825
Electric Box and Lid(s) Plastic V0 Plastic V0 Plastic V0 Plastic
Insulation PUR ECO Foam ECO Foam ECO Foam
Outer Casing Steel Epoxy Coated Epoxy Coated Epoxy Coated
Energy Source   Suggested Suggested Suggested
Type - Primary   Boiler Boiler Boiler
Type - Secondary   - - -
Temperature - Primary / Lower   High Temp. High Temp. High Temp.
Temperature - Secondary / Upper   - - -
Heating Coil(s)
Surface area - Primary / Lower 0.80 0.80 0.80
Surface area - Secondary / Upper - - -
Recommended Flow Rate ltr./min. 20 20 20
Heat Source Buffer Volume ltr. - - -
Electric
Immersion Heater Booster - Capacity kW - - -
Immersion Heater Backup - Capacity kW 3.0 3.0 3.0
Immersion Heater - Phase Phase 1 1 1
Immersion Heater - Voltage Volt 230 230 230
Thermostat Type   Surface Surface Surface
Upper Working Thermostat - Temp. Range °C - - -
Upper Working Thermostat - Set Temp. °C - - -
Lower Working Thermostat - Temp. Range °C 60-90 60-90 60-90
Lower Working Thermostat - Set Temp. °C 75 75 75
Electrical Installation   Regulations Regulations Regulations
IP Classification   IP 21 IP 21 IP 21
Connections
Cold Feed / Hot Water Draw Off Location Top Top Top
Cold Feed / Hot Water Draw Off Compression 15mm 15mm 15mm
Safety Valve (Drain Connection) " (inches) Use Overflow Use Overflow Use Overflow
Safety Valve (Overflow Connection) " (inches) 3/4 - Female 3/4 - Female 3/4 - Female
T&P Valve (Overflow Connection) Compression 15mm 15mm 15mm
Secondary Return / Hot Water w/o mixing " (inches) 3/4 - Female 3/4 - Female 3/4 - Female
Immersion Heater(s) " (inches) 5/4 5/4 5/4
Primary Coil Flow / Return " (inches) 3/4 - Female 3/4 - Female 3/4 - Female
Secondary Coil Flow / Return " (inches) - - -
Sensor Connection w/ PG nipple mm. - - -
Safety
Safety Valve - Opening Pressure +/- 5 % Bar 9 9 9
T&P Valve - Opening Pressure/Temp. Bar/°C 10/95 10/95 10/95
Safety Thermostat - Cut-out Temp. °C 98 98 98
Inner Cylinder - Design Pressure /Temp. Bar/°C 10/99 10/99 10/99
Coil(s) - Design Pressure Bar 10 10 10
Certifications / Approvals
Product Certifications Certificates CE / NEMKO / KIWA / WRAS
Manufacturing Plant Approvals Standards ISO 9001:2008 / ISO 14001:2008 / OHSAS 18001
Environment
Environmental Declaration 100 % Recyclable / >60 % Recycled Materials / ODP of 0 / GWP of 1
Warranty - Water Quality EN 98/83EC
Water - Chloride Content Max - Cl ppm 250 250 250
Water - Sulphate Content Max - So4 ppm 250 250 250
Water - Chloride/Sulphate Content Max ppm 250 250 250
Warranty Period - Inner Cylinder / Parts Years 10 / 2 10 / 2 10 / 2