Print this page as PDF

Send this page via e-mail

Add it to Favorites

Share OSO Hotwater on Twitter

Share OSO Hotwater on Facebook

Share this page with others

OSO Slimline - RD

  - Easy to place on wall or floor in tight spaces

The Slimline is only 430mm in diameter, making the cylinder ideal for installation in tight spaces. Wall mounting bracket is included, and makes the Slimline extremely versatile.

The Slimline series cylinder will fit into the most compact of spaces thanks to its 430 mm. diameter. Slimline is simple to install, with all connections on top of the cylinder. The factory fitted mixing valve provides adjustable hot water temperature, non-return and stop valve. The Slimline can also be wall mounted with the supplied bracket. An electric cable is supplied factory fitted to the cylinder for connection to the mains supply.

 

Key advantages:

  • Ideal for limited hot water requirements and installation in tight spaces
  • Lightweight & compact cylinder for easy handling & installation
  • 10 year warranty on the stainless steel inner cylinder
Wallsmart - W
Floorsmart - RL/RRL
Technical Specifications
Quick Facts
Choose volume

Slimline is available in 2 volumes, suitable for the no. of people designated in the table below. The table is based on experience from average hot water usage in a normal household. If the household has a large hotwater usage, one should choose another product series, such as the Super Standard. Hotwater capacity is calculated by instant tapping at 40°C.

 

 

 
Prod. nr. Product description Capacity Hot water - 40°C Heat-up (best) - 15°C - max. Recovery (best) - after 75% Heat loss - 24 hours Dia x H mm. Weight
21,102,110 Slimline RD 30 - 1,95 kW/1x230V 1,0 pers. 56 l. 55 l./hr. 1,1 hrs. 0,46 kWh ø430x480 14
80,102,500 Slimline RD 150 - 1,95 kW/1x230V 3,0 pers. 280 l. 55 l./hr. 5,0 hrs. 2,00 kWh ø430x1700 34
Product Data Sheet
  - click to expand   - click to collapse
 
Direct Electric Unit Type Type
Product Slimline RD 30 RD 150
Product No. OSO no. 21,102,110 80,102,500
Product Capacity Persons 1,0 3,0
Product Segment   Domestic Domestic
Product
Weight - Net kg 14 34
Height - Max mm. 480 1700
Diameter mm. 430 430
Volume - Actual ltr. 30 147
Usable hot water draw off at 40°C (ltr) ltr. 56 280
Hot Water / hour at 40°C (ltr) ltr. 55 55
Heat Up Time - 15°C - max Temp. hours 1.1 5.0
Standing Heat Loss - 24 hours kWh/24 hours 0.46 2.00
Dimensions - Cardboard Box LxWxH mm. 475x475x580 475x475x1750
Volume - Cardboard Box 0.13 0.38
Materials
Inner Cylinder Stainless Steel Duplex Duplex
Electric Element(s) Stainless Steel Incoloy 825 Incoloy 825
Electric Box and Lid(s) Plastic V0 Plastic V0 Plastic
Insulation PUR Mineral Wool Mineral Wool
Outer Casing Steel Epoxy Coated Epoxy Coated
Energy Source
Type - Primary   Electric Electric
Electric
Immersion Heater - Capacity kW 1.95 1.95
Immersion Heater - Phase Phase 1 1
Immersion Heater - Voltage Volt 230 230
Thermostat Type   Surface Surface
Working Thermostat - Temperature Range °C 40-70 60-90
Working Thermostat - Set Temperature °C 70 75
Electrical Installation   Regulations Regulations
IP Classification   IP 21 IP 21
Connections
Cold Feed / Hot Water Draw Off Location Top Top
Cold Feed / Hot Water Draw Off Compression 15mm 15mm
Safety Valve (Drain Connection) " (inches) 3/8 - Female 3/8 - Female
Safety Valve (Overflow Connection) " (inches) 3/4 - Female 3/4 - Female
P&T Valve " (inches) - -
Secondary Return / Hot Water w/o mixing " (inches) - -
Immersion Heater(s) " (inches) 1 1
Safety
Safety Valve - Opening Pressure +/- 5 % Bar 9 9
P&T Valve - Opening Pressure/Temp. Bar/°C - -
Safety Thermostat - Cut-out Temp. °C 85 98
Inner Cylinder - Design Pressure /Temp. Bar/°C 10/99 10/99
Certifications / Approvals
Product Certifications Certificates CE / NEMKO
Manufacturing Plant Approvals Standards ISO 9001:2008 / ISO 14001:2008 / OHSAS 18001
Environment
Environmental Declaration 100 % Recyclable / >60 % Recycled Materials / ODP of 0 / GWP of 1
Warranty - Water Quality EN 98/83EC
Water - Chloride Content Max - Cl ppm 250 250
Water - Sulphate Content Max - So4 ppm 250 250
Water - Chloride/Sulphate Content Max ppm 250 250
Warranty Period - Inner Cylinder / Parts Years 10 / 2 10 / 2