Print this page as PDF

Send this page via e-mail

Add it to Favorites

Share OSO Hotwater on Twitter

Share OSO Hotwater on Facebook

Share this page with others

Modul - M

  - Seamless integration with other appliances

The Modul is a square shaped unit, with distinctive design features. Ease of installation combined with all connections hidden makes the Modul fit seamlessly together with other appliances. All connections are located in an adequate installation space underneath. OSO Modul M is available in 200 and 300 l. volume

The factory fitted mixing valve provides adjustable hot water temperature, non-return and stop valve. Duplex stainless steel makes the Modul extremely lightweight compared to other square shaped cylinders. Low heat loss is provided by OSO ECO Foam, with impressive key figures for GWP of 1 (Global Warming Potential) and ODP of 1 (Ozone Depletion Potential.) Integrated, adjustable feet.

 

The Modul heats up to 70°C, with water then blended down when drawn off, increasing available hot water compared to others.

Key advantages:

  • Square design with all connections hidden for integration with other appliances
  • Duplex stainless steel for lightweight handling and aggressive environments
  • 10 year warranty on the stainless steel inner cylinder & OSO ECO Foam insulation
Floorsmart - RL/RRL
Super Coil - SC
Technical Specifications
Quick Facts
Choose volume

Modul is available in 2 volumes, suitable for the no. of people designated in the table below. The table is based on experience from average hot water usage in a normal household. Hotwater capacity is calculated by instant tapping at 40°C. At 40°C a normal shower uses approx. 60 l., bathtubs 180 l. and bubblebaths 400 l.

 

 

 
Prod. nr. Product description Capacity Hot water - 40°C Hot Water / hour - 40°C Heat-up Time - 15 - 75°C: Heat loss - 24 hours Dia x H mm. Weight
20 203 800 Modul M 200 - 3 kW/1x230V 3,5 pers. 350 l. 55 l./hr. 3,8 hrs. 1,30 kWh 595x1355 73
20 203 900 Modul M 300 - 3 kW/1x230V 4,5 pers. 530 l. 55 l./hr. 6,0 hrs. 1,70 kWh 595x1820 96
Product Data Sheet
  - click to expand   - click to collapse
 
Direct Electric Unit Type Type
Product Modul M 200 M 300
Product No. OSO no. 20 203 800 20 203 900
Product Capacity Persons 3,5 4,5
Product Segment   Domestic Domestic
Product
Weight - Net kg 73 96
Height - Max mm. 1355 1820
Diameter mm. 595x635 595x635
Volume - Actual ltr. 185 280
Usable hot water draw off at 40°C (ltr) ltr. 350 530
Hot Water / hour at 40°C (ltr) ltr. 55 55
Heat Up Time - 15°C - max Temp. hours 3,8 6,0
Standing Heat Loss - 24 hours kWh/24 hours 1,30 1,70
Dimensions - Cardboard Box LxWxH mm. 595x635x1500 595x635x1900
Volume - Cardboard Box 0,55 0,72
Materials
Inner Cylinder Stainless Steel Ferritic Ferritic
Electric Element(s) Stainless Steel Incoloy 825 Incoloy 825
Electric Box and Lid(s) Plastic V0 Plastic V0 Plastic
Insulation PUR ECO Foam ECO Foam
Outer Casing Steel Epoxy Coated Epoxy Coated
Energy Source
Type - Primary   Electric Electric
Electric
Immersion Heater - Capacity kW 3 3
Immersion Heater - Phase Phase 1 1
Immersion Heater - Voltage Volt 230 230
Thermostat Type   Surface Surface
Working Thermostat - Temperature Range °C 60-90 60-90
Working Thermostat - Set Temperature °C 75 75
Electrical Installation   Regulations Regulations
IP Classification   IP 44 IP 44
Connections
Cold Feed / Hot Water Draw Off Location Bottom Bottom
Cold Feed / Hot Water Draw Off Compression 22mm 22mm
Safety Valve (Drain Connection) " (inches) 3/8 - Female 3/8 - Female
Safety Valve (Overflow Connection) " (inches) 3/4 - Female 3/4 - Female
P&T Valve " (inches) - -
Secondary Return / Hot Water w/o mixing " (inches) - -
Immersion Heater(s) " (inches) 5/4 5/4
Safety
Safety Valve - Opening Pressure +/- 5 % Bar 9 9
P&T Valve - Opening Pressure/Temp. Bar/°C - -
Safety Thermostat - Cut-out Temp. °C 98 98
Inner Cylinder - Design Pressure /Temp. Bar/°C 10/99 10/99
Certifications / Approvals
Product Certifications Certificates CE / NEMKO / KIWA / WRAS
Manufacturing Plant Approvals Standards ISO 9001:2008 / ISO 14001:2008 / OHSAS 18001
Environment
Environmental Declaration 100 % Recyclable / >60 % Recycled Materials / ODP of 0 / GWP of 1
Warranty - Water Quality EN 98/83EC
Water - Chloride Content Max - Cl ppm 250
Water - Sulphate Content Max - So4 ppm 250
Water - Chloride/Sulphate Content Max ppm 250
Warranty Period - Inner Cylinder / Parts Years 10 / 2